Nothing Phone 1

Nothing Phone 1 Firmware

You can now download the Nothing Phone 1’s official stock firmware from the links below. By using this firmware, you can solve all software issues on your Nothing Phone 1, such as hang on logo, FRP lock, fastboot mode screen blank, power off automatically, and so on., display blank or white after flash, dead recovery, dead after flash, etc.

Nothing Phone is powered by QCOM SD778 processor and runs Android 12. 
dual-SIM smartphone that accepts Nano-SIM cards. connections available  Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G, 4G, and 5G should all be present.  The device has 128GB of storage that can be expanded with an SD card and 6GB of RAM.


  • Make full backup of your device first. 
  • patched firehose is needed to get around “SLA authentication,” and charging the device will stop it from shutting down accidentally while the process is in progress.


  • flashing may brick your phone, flash at your own risk
Firmware Information:
Device Name Nothing Phone 1
ROM Type Full ROM + OTA
SoC Mediatek
OS Android 12
Password Null
Root Access No
Region GLO, EEA
Firmware Version V1.1.2
[the_ad id=’190809′]

Putting Stock Firmware on a Nothing Phone:

  • download & extract Firmware zip
  • Now you will get payload.bin, extract payload.bin using this tool
  • extract platform tools to the firmware images folder
  • Open a command window on the firmware folder
  • connect the phone to the computer in the fastboot mod
  • now send the below code
fastboot flashing unlock
fastboot flashing unlock_critical
  • on phone confirm unlock warning by pressing the volume up key
  • then flash firmware images followed by this command
fastboot flash 'partition name' 'filename'

repeat the command and write all the images one by one, once done set the active slot to A

fastboot set_active a

have any question Let Me know Via comment.

Leave a Reply

Your email address will not be published.