PC Guides

Fix: Onikuma Headset Not Working on PS4, PS5, Xbox One, Series X and S

Fix: Onikuma Headset Not Working

Whenever thinking about budget-centric best-in-class gaming headphones in various styles, then Onikuma headphones show up very first in your mind. They provide great high quality and sound cancellation which others cost 100s or even more in popularity. While the mic is also suitable for gaming. Even so, exactly like some other gaming headsets, some customers face Onikuma Headset No longer working with PS4, PS5, Xbox One, and Series X|S consoles.

Now, should you be also among the people of this problem, then simply stick to the repair instructions on fix it. The probabilities are higher which possibly the headset is not functioning, can’t get detected, or for some reason, the mic isn’t functioning. In most situations, a few possible workarounds pointed out below should be useful. Such a problem is very usual among gaming headsets, so Onikuma headsets are no exception.

Fix: Onikuma Headset Not Working on PS4, PS5, Xbox One, Series X, and S

It does not matter if you’re dealing with this specific problem on the Xbox console or the PlayStation console, you may follow the solutions accordingly until it finally may get solved. Now, without wasting any more time, let me jump into it.

This is a troubleshooting guide for

  • Onikuma X10
  • Onikuma X10 Pro
  • Onikuma B60
  • Onikuma X11
  • Onikuma K9
  • Onikuma X15 Pro
  • Onikuma B3
  • Onikuma K10
  • Onikuma X7 Pro
  • Onikuma K10
  • Onikuma K20
  • Onikuma X16
  • Onikuma X15
  • Onikuma K10 Pro
  • Onikuma K20
  • Onikuma X7
  • Onikuma K16
  • Onikuma K15
  • Onikuma K19
  • Onikuma X9
  • Onikuma X3
  • Onikuma X4
  • Onikuma K6
  • Onikuma K9
  • Onikuma K8
  • Onikuma K11

1. Reconnect the Head-set

To begin with, try disconnecting and reconnecting the headset correctly to the console. Occasionally the ” cable ” connection may not easily fit in its spot well which could trigger the headset not to identify or not working issue. It’s a usual concern and to fix mostly. If the headphone jack port has some dust or moisture then be sure to clean up it using a dry towel.

2. Check If Headset is Physically Damaged

Check out if the Onikuma headset cable is in some way broken or not. The cord or the connector pin or the headphone hardware could get ruined unexpectedly. When there is any curved, broken, or ripped wire condition then you definitely should do the repair or replace it. A few users did repair the Onikuma Headset Not Working problem by cross-checking this point.

3. Power Cycle the Console

Well, doing the power cycle technique on the console might going to help to refresh the system to prevent temporary errors or cache files issues. Just be sure to push and hold the Power switch on the console till the LED indicator turns off after that remove the power cable connection from the console. Now, wait for a short while and link the cable to the console after that switch it on. It may be useful.

4. Update the System Software

Be sure to scan for the device software upgrade on the Xbox or PlayStation console because an out-of-date system build can induce multiple issues with the overall performance as well as headset connectivity. It’s far better to keep the console updated.

For Xbox Consoles:

  • Press the Home button on the Xbox gaming console to open the Dashboard menu.
  • Choose Settings from the end of the menu > Choose to All Settings.
  • Choose to System > Select Updates.
  • Select Update Console > Continue with the onscreen prompts to finish the update process.
  • Once finished, be sure to reboot the gaming console to apply changes.

For PlayStation Consoles:

  • Go to the Settings menu on the PlayStation console.
  • Choose System Software Update > Be sure to look for offered updates and continue with
  • the onscreen directions to finish the update process.
  • When done, restart the device to apply changes.

5. Update Controller Firmware

It can also be possible that there is a controller update impending to become set up that may additionally cause many difficulties with the connected headset. This specific method may resolve the Onikuma Headset Not Working problem.

For Xbox Consoles: (Wireless)

Ensure that the headset is attached to the controller (wireless adapter).

  • Push the Xbox button on the controller to open the guide menu.
  • Choose Profile & system > Choose Settings > Select Devices & connections.
  • Select Accessories then select the Xbox controller that you want to update.
  • On the Xbox Wireless Controller screen, select ‘…‘ to check the firmware version for the controller.
  • If you have an ‘Update’ available, choose the Firmware version.
  • Simply continue with the on-screen directions and complete it.

For Xbox Consoles: (Wired)

In this case, if you’re using a stereo headset adapter, plug in a headset also it should be turned on.

  • Now, connect the USB cable to your Xbox’s USB port.
  • For Xbox Series X, the slot is on the front right under the Pair switch.
  • For Xbox Series S, the port is on the front left next to the Pair button.
  • For Xbox One, the port is on the left side of the console.
  • Plug another end of the USB cable into the top of the controller.
  • Next, press the Xbox button on the controller to open the guide menu.
  • Choose Profile & system > Select Settings > Select Devices & connections.
  • Choose Accessories then select the controller that you want to update.
  • On the Xbox Wireless Controller screen, select ‘…‘ to check the firmware version for your controller.
  • If it says ‘Update’, select Firmware version > Follow the on-screen steps to complete it.

For PlayStation Consoles:

  • Make sure to connect the controller to your PlayStation console using the USB cable.
  • Go to Settings > Select Accessories.
  • Choose Controllers > Select Wireless Controller Device Software.
  • If there is an update available, just Download and Install it.

6. Change Audio Configurations

It’s also strongly suggested to adjust the sound settings of the console by using the steps below. Occasionally the audio or microphone regarding options may conflict a lot.

For Xbox Consoles:

  • Through the Xbox home screen, visit Settings > Choose Account.
  • Choose Privacy & online safety > Select View details & customize.
  • Choose to Communicate with voice and text > Select everybody.
  • Please Note: Child profiles can not change the privacy setting. You can sign into the
  • associated parent profile to switch this setting for a child profile.

For PlayStation Consoles:

  • Visit the PS4/PS5 Settings menu > Select Devices > Select Audio Devices.
  • Choose Input Device > Choose Headset Connected to Controller.
  • Select Volume Control (Headphones) > Set the Volume Level to Highest.
  • Be sure to choose Output to Headphones > Select All Audio.
  • Now, select Change Microphone Level > Follow the wizard to check your microphone status.
  • Finally, choose Output Device > Select Headset Connected to Controller > Do the same steps again for your output device.

7. Adjust Chat Mixer Settings on Xbox Consoles

It is recommended to adjust the chat mixer options on the Xbox console since it may change the sound which you hear based on what other people are saying. Therefore, this specific option can come in handy throughout gameplay and may fix the Onikuma Headset Not Working problem.

  • From the Xbox home screen, go to Settings > Select Display & Sound.
  • Select Volume > Choose Chat Mixer > Choose Do nothing.

8. Adjust Party Chat Output on Xbox Consoles

Try changing your party chat output configurations on the Xbox Console since it will let you select if the party chat is coming from your headset or TV speakers. If you wish to change it out to come through your speakers then change the party chat output device.

  • Visit Settings on Xbox console > Select Display & Sound.
  • Select Volume > Select Party chat output.
  • Choose Speakers > If Speakers are selected, make sure to switch it to Headset.

9. Make sure the Volume is not Muted and Set to Higher

You must also take a look at if the volume is muted on the console not really. If it’s muted then simply unmute it and place the volume level on the higher side so that you can hear out audio on the headset. Although it’s a usual action to take, a few users did not remember to do that in a rush. It can also fix the Onikuma Headset Not Working problem.

10. Try Using Another Headset

When the above strategies didn’t be useful be sure to try using an alternative gaming headset on the console to cross-check whether the audio-related problem or the headset not working problem is still bothering you or not. If in case, the headset is functioning well now then there is a problem with the Onikuma headset regarding connectivity or inner hardware. If you’re even now dealing with exactly the same problem, you can speak to support by following the final method.

11. Try Changing Controller Batteries

It’s also recommended to change the electric battery on the controller to see if the headset is functioning or not because a lower power amount on the gaming controller might happen the headset to not identify or the mic not working problem.

12. Contact Onikuma Assistance

If none of the options proved helpful for you, test getting in touch with Onikuma Support for more support. In case your headset is under warranty then it’ll become easier to replace the product. Often a manufacturing defect may also reason for this kind of complaint about some unlucky users however that doesn’t mean it cannot be fixed.

That’s it, folks. We believe this article was useful to you. For further

Leave a Reply